Flying Bull (Ningbo) Electronic Technology Co., Ltd.

 

 

 

1. The main oil circuit pressure regulator is faulty, so that the main oil circuit oil pressure is too high. The engine idle speed is too high.

 

2. If the transmission Solenoid Valve 0260130036 does not work after being energized, treatment method: Check whether the power line contact is poor, check whether the power supply voltage is in a reasonable range, check whether the coil falls off or short circuit, and finally can not solve the problem can consider replacing the solenoid valve.

 

3. Solution: Replace the solenoid valve coil. Automatic transmission solenoid valve common fault two: Solenoid valve plug/socket problems; If the solenoid valve has a plug/socket, it may be that there is a problem with the metal reed of the socket, there is a problem with the wiring on the plug (such as the power line grounding wire), and the power can not be sent to the coil.

 

4. The control line of transmission Solenoid Valve 0260130036 is faulty. A short circuit or open circuit of the battery valve may cause the solenoid valve to fail. This can be confirmed by measuring the resistance value of the relevant line, but note that measuring on and off is not accurate. Both tests were fine. At this point, we need to check the gearbox computer.

 

 

http://www.flyingbullvalve.com/